| Unit | 1 pair |
| Applicable fusion splicer | FITEL S179A, NJ001, S153A and S123C |
| Applicable fibre | Single fibre |
| Coating diameter of fibre | 100 to 1000 [µm] |
| Fibre cleave length | 5 to 10 [mm] (Coating diameter: 100 to 250 [µm]) 10 [mm] (Coating diameter: more than 250 [µm]) |
| Operating temperature | -10 to 50°C |
| Storage temperature | -40 to 60°C |
| Unit | 1 pair |
| Applicable fusion splicer | FITEL S179A, NJ001, S153A and S123C |
| Applicable fibre | Single fibre |
| Coating diameter of fibre | 100 to 1000 [µm] |
| Fibre cleave length | 5 to 16 [mm] (Coating diameter: 100 to 250 [µm]) 16 [mm] (Coating diameter: more than 250 [µm]) |
| Operating temperature | -10 to 50°C |
| Storage temperature | -40 to 60°C |
A must-have tool in any splicing kit, our S211B optical fibre stripper allows easy stripping of single fibre.
Thanks to its 3 different positions, it can strip various sizes of coatings, down to the 125um bare glass fibre.
| Position 1 | Strips off 2mm/3mm cordage |
| Position 2 | Strips off 900um buffer |
| Position 3 | Strips off 900 & 250um buffer |
Our electrode sharpener is made of rubber with abrasive qualities, ideal for the cleaning and sharpening of S960, S969 and ELR-01 electrodes.
| Small Table | with some Specs |
|---|---|
Clean v-grooves are important to achieve good splicing. Regular cleaning with this small brush will stop residue from building up in the v-grooves of your splicer.
| Small Table | with some Specs |
|---|---|
| Unit | 1 pair |
| Applicable fusion splicer | FITEL S179A, NJ001, S153A and S123C |
| Applicable fibre | Single fibre |
| Coating diameter of fibre | 100 to 1000 [µm] |
| Fibre cleave length | 5 to 10 [mm] (Coating diameter: 100 to 250 [µm]) 10 [mm] (Coating diameter: more than 250 [µm]) |
| Operating temperature | -10 to 50°C |
| Storage temperature | -40 to 60°C |
| Unit | 1 pair |
| Applicable fusion splicer | FITEL S179A, NJ001, S153A and S123C |
| Applicable fibre | Single fibre |
| Coating diameter of fibre | 100 to 1000 [µm] |
| Fibre cleave length | 5 to 16 [mm] (Coating diameter: 100 to 250 [µm]) 16 [mm] (Coating diameter: more than 250 [µm]) |
| Operating temperature | -10 to 50°C |
| Storage temperature | -40 to 60°C |