S184PM-SLDF adjusts for different fibre coating and cladding sizes. There is no need to exchange v-grooves, or fibre clamps. In addition, S184PMSLDF has been designed so that the user simply loads the fibre and closes the lid to begin the splice process. There is no need to lower or set fibre clamps before beginning your splice. S184PM-SLDF automatically performs a tensile proof test on the fibre and releases the holder lid to avoid twisting the fibre after the splice. This automation eliminates the need for the user to manually open and reset the splicer after each fusion splice.
| Applicable Fibers | SM, MM, DSF, NZD, EDF, PMF, LDF, PCF, HighΔ |
|---|---|
| Cladding Diameter | 80 to 1200 µm |
| Coating Diameter | 160 to 2000 µm |
| Fibers Cleave Length | 5 mm with coating clamping 9 to 11 mm with bare fibre clamping |
| Sweep Length | ±1.9 mm |
| Typical Insertion Loss (Similar fibre Splicing) | 0.03 dB for identical SM |
| Typical Insertion Loss (Dissimilar fibre Splicing) | 0.15 dB (SMF to DSF) 0.25 dB (SMF to HI980 fibre) |
| Extinction Ration (Cross Talk) (Similar fibre Splicing) | -35 dB (1.0 degree) (PANDA fibre) -30 dB (1.8 degree) (BOW-TIE fibre) |
| Extinction Ration (Cross Talk) (Dissimilar fibre Splicing) | -28 dB (2.3 degree) (PANDA fibre to BOW-TIE fibre) |
| Return Loss | >60dB |
| Splice Time | 20 seconds for identical SM Fibers 45 seconds for identical PM Fibers (cladding clamping) |
| Heating Time | 51 seconds for 60 mm sleeves 40 seconds for 40 mm sleeves |
| Manual Splicing Mode | Gap setting Manual alignment (X, Y, Θ) Support Tool for Manual splicing |
| Auto Splicing Mode | SM-MM-DSF automatic recognition Splicing dissimilar fibre PANDA fibre Auto |
| Splice Programs | 41 Default/150 Available |
| Heating Programs | 10 Default/12 Available |
| Sleeve | 20, 40, 60 mm |
| Tensile Strength | Typical 300 kpsi (25N) with High strength splice (125µm cladding fibre) |
| Magnification | 215x & 430x |
| Splice Memory | Maximum 2000 splices |
| Size | 350W × 197D × 154H mm |
| Weight | 8.8 kg |
| Monitor | 6.5'' colour LCD monitor |
| Video Output | Analog RGB |
| Data Output | USB ver.1.1 end Ethernet |
| Operating Temperature | 0 to +40°C (without excessive humidity) |
| Storage Temperature | -40 to +60°C (without excessive humidity) |
| Power Source | AC 100 to 240 V (50/60 Hz, AC Adaptor) |
We have a range of fibre holders that can be equipped with the NJ001 to handle most of your splicing needs.
A cooling tray built especially for the NJ001; it is a useful tool for placing hot fibre straight out of the heating chamber to a provide a smooth and uninterrupted splicing experience.